Microwave radio frequency

Microwave radio frequency

  • L/S Band RF Front End Components

    L/S Band RF Front End Components

    The product consists of 4 down-conversion channels, whose function is to amplify, filter, down-convert the input S-band RF signal to an intermediate frequency and then output. The 3-channel down-conversion channel of the product has the working mode of ground and star, the product includes the power supply input voltage, and the function of selecting the working mode status detection and reporting

    The product is small in size and low in power consumption. It includes four down-conversion channels in S-band, and has the working mode of ground and satellite; power output AGC control.

  • Ku Band BUC 100W

    Ku Band BUC 100W

    Space power synthesis;

    Digital temperature compensation;

    Monitoring interface RS-485, 232;

    Small size;

    High linearity.

  • L-Band Switch Matrix

    L-Band Switch Matrix

    The product realizes 12×12 non-blocking full switching, and has the function of local control in the internal connection mode of the input and output interfaces; it has the function of local/remote control switching to realize local control and remote monitoring of the equipment; it has the function of status reporting, which can report the status of each channel of the equipment to the Receiving sub-control subsystem; has the ability to receive and process control instructions and macro configuration of the sub-control subsystem, and report the control response to the receiving sub-control subsystem; with power-off protection function, the original configuration parameters can be retained after power failure; power supply The module adopts dual redundant hot standby.

    12×12, non-blocking full swap.

  • CBand LNB

    CBand LNB

    Low noise figure;

    High frequency stability;

    Low power consumption.

  • Ku LNB(HX-KuLNB)

    Ku LNB(HX-KuLNB)

    The Ku-band LNB mainly includes a receiving channel, a low-noise amplifier, and a local oscillator circuit; it amplifies the low-noise signal of the Ku-band from the satellite and down-converts it to the S/L band. The product has the characteristics of high reliability and small size, and the product is used in satellite ground terminals.

    Low noise; high frequency stability; small size; low phase noise; performance indicators have reached the international advanced level.

  • CBand BUC 20W

    CBand BUC 20W

    High linearity;

    Low power consumption;

    Micro package miniaturization technology.

  • S – band 5W miniaturized power amplifier

    S – band 5W miniaturized power amplifier

    This product uses GaN die and uses advanced in-plane matching technology and mature thin-film hybrid Integrated process, the efficiency reaches more than 50%, it is suitable for continuous wave and various pulse width working conditions.

    High working efficiency, metal shell package, easy to dissipate heat; good 50Ω impedance matching, easy to cascade use.

  • Ka 3W Transceiver

    Ka 3W Transceiver

    Ka-band transceiver integrates transmit channel, power amplifier, receiving channel, low-noise amplifier, local oscillator circuit, and waveguide duplexer; the intermediate frequency signal is up-converted to Ka-band power amplification and then transmitted to the satellite, while the K-band signal from the satellite is transmitted to the satellite. Down-converted to L-band after low-noise amplification. The input waveguide port of the low noise amplifier and the output waveguide port of the power amplifier are connected to the antenna feed source through the waveguide duplexer, and the IF is externally connected to the modem. The product is characterized by broadband and low power consumption, and can be applied to the China Star 16 satellite ground terminal.

    Circular polarization; integrated OMT, BUC, LNB; high-performance feed horn; compact structure; performance indicators reach the international advanced level.

  • Miniaturized down conversion

    Miniaturized down conversion

    This family of devices consists of amplifiers, bandpass filtering mixers, low-pass filters, amplifiers, sound table filter and other components, the main function is to convert the high frequency radio frequency carrier signal into an intermediate frequency signal, which is easy for signal processing and is widely used in the receiver of the communication system.The components adopt a hybrid integration process, which is small in size and reliable in It has the characteristics of high gain and low noise figure.

    High integration, small size; low noise figure; small local oscillator power requirements; good 50Ω matching, easy to use in cascade; meet airborne and bomb-borne requirements.

  • K Band LNB

    K Band LNB

    Low noise figure;

    High frequency stability;

    Small size;

    Low phase noise.

  • S Band Balanced Field Amplifier

    S Band Balanced Field Amplifier

    Adopt balanced circuit structure design to ensure stable Wave good, surface mount standard SM-23 case, volume Small and reflowable.

    High integration, small size; high gain, good standing wave, low noise; good phase and amplitude consistency.

  • Ka Band BUC 2/4W

    Ka Band BUC 2/4W

    Wide frequency range;

    Low phase noise;

    High Linearity.

12 Next > >> Page 1 / 2