Navigation short message RF front end
Main Indicator Parameters
Parameter name |
Typical value |
Model |
621-2400-002 |
Some parameters of the power amplifier |
|
Working frequency |
Navigation second generation and Navigation third generation frequency |
Input and output impedance |
50Ω |
Gain |
≥40dB |
Input standing wave |
≤2 |
Gain flatness |
≤1dB |
Output Power |
≥39dBm |
Harmonic suppression |
≥50dBc(@二次) ≥50dBc (@Secondary) |
Out-of-band stray power (saturated power output) |
≤-80 dBm@1561±2.04MHz; ≤-72 dBm@1575±1.023MHz; ≤-80 dBm@1207±1.023MHz; ≤-80 dBm@2491.75±4.08MHz; |
Way of working |
Pulse work |
Open method |
Voltage detection, when the power supply is +28V, the power amplifier is turned on, and the power amplifier is turned off when the power supply is 12V (low power consumption is silent when turned off) |
Operating Voltage |
+26V~30V |
Working current |
≤3A |
Low noise amplifier performance indicators |
|
Working frequency |
S-band, Navigation 2nd generation, Navigation 3rd generation frequency |
Input and output impedance |
50Ω |
Gain |
≥26.5dB |
Input standing wave |
≤2 |
Output standing wave |
≤2 |
Gain flatness |
≤1dB |
Noise figure |
≤2dB |
Output 1dB compression point power |
≥0dBm |
Operating Voltage |
12V |
Working current |
≤0.3A |
Cutom instructions Frequency range and parameter indicators can be customized. |
Parameter name |
Typical value |
Model |
621-2400-002 |
Some parameters of the power amplifier |
|
Working frequency |
Navigation second generation and Navigation third generation frequency |
Input and output impedance |
50Ω |
Gain |
≥40dB |
Input standing wave |
≤2 |
Gain flatness |
≤1dB |
Output Power |
≥39dBm |
Harmonic suppression |
≥50dBc(@二次) ≥50dBc (@Secondary) |
Out-of-band stray power (saturated power output) |
≤-80 dBm@1561±2.04MHz; ≤-72 dBm@1575±1.023MHz; ≤-80 dBm@1207±1.023MHz; ≤-80 dBm@2491.75±4.08MHz; |
Way of working |
Pulse work |
Open method |
Voltage detection, when the power supply is +28V, the power amplifier is turned on, and the power amplifier is turned off when the power supply is 12V (low power consumption is silent when turned off) |
Operating Voltage |
+26V~30V |
Working current |
≤3A |
Low noise amplifier performance indicators |
|
Working frequency |
S-band, Navigation 2nd generation, Navigation 3rd generation frequency |
Input and output impedance |
50Ω |
Gain |
≥26.5dB |
Input standing wave |
≤2 |
Output standing wave |
≤2 |
Gain flatness |
≤1dB |
Noise figure |
≤2dB |
Output 1dB compression point power |
≥0dBm |
Operating Voltage |
12V |
Working current |
≤0.3A |
Cutom instructions Frequency range and parameter indicators can be customized. |